Users:Structural Optimization/Response Functions/Stress

From Carat++ Public Wiki
Jump to: navigation, search


Contents

General Description

Short Info

The Kreisselmeier-Steinhauser function for the stresses is a global measure of stress in a structure. Stress results are generally very local results but using this responce function an overall stress indicator is obtained. It can be used as an objective to reduce the overall stress in the structure or as a constraint to limit the stress in the structure to a maximum allowed value.

The Kreisselmeier-Steinhauser function for the stresses is formulated by

KS = 1/ρ log (i exp (ρ σi/ σmax ))

with i a summation over all Gausspoints in the domain and σi the stress in the i-th Gausspoint from a linear or nonlinear analysis. σmax is the maximum allowed stress. ρ is a parameter that determines the importance of the largest stresses amongst all σi. The response function requires the ID of a linear static analysis or a nonlinear static analysis specified for parameter 'ANALYSIS'.

This function was originally designed as a continuous alternative for max(σi). The larger ρ, the more KS approaches max(σi). For a large ρ, the value of KS depends merely on the maximal stress value so the effect of the function is limited to the neighbourhood of this maximal stress. If ρ is small, KS is always larger than max(σi). When reducing ρ the effect of the function becomes more global since more stresses contribute significantly to its value. It is required to specify a value for ρ with the input parameter RHO. A reasonable range of ρ is between 1 and 100.

The value of the exponential function becomes infinite very fast, even for reasonable values of the argument. Therefore, the value of σmax should not be too small. The best results are obtained if the stresses σi are similar to σmax. If all the stresses in the structure are much smaller than the allowed stress, there will be no reasonable value of ρ that is large enough to make KS similar to max(σi). As a consequence, KS will be similar for all proposed structures and thus become useless. If the value of the maximum allowed stress is specified by the paramater STRESS_LIMIT, the formula stated above is used. If a positive value is specified for STRESS_LIMIT, the negative stresses have a very limited contribution to the value of KS. If the value for STRESS_LIMIT is negative, the largest negative stresses determine KS completely. In constrast, if ABS_STRESS_LIMIT is used, the formulation of KS is changed to:

KS = 1/ρ log (i exp (ρ abs(σi) / σmax ))

such that both the negative and the positive stresses influence the value of the response function.

So to summarize: if this response function is used as an objective function, the value of σmax should be chosen such that it is close to the real stresses in the structure. Additionally, the value for ρ should be rather low to obtain a measure of stress with a global effect. If this response function is used as a constraint function, the value of σmax should be chosen as the real maximum allowed value. If the material has the same stress limit in tension and compression, ABS_STRESS_LIMIT can be used. However, if the limit in tension and compression is different, two constraints should be added with the respective positive and negative STRESS_LIMIT. Using this response function as a constraint is conservative since KS will always be at the safe side. To limit this overdimensioning, it is necessary to choose a sufficient high ρ to be sure that KS is close to max(σi). However, ρ should not be too high, since this introduces similar numerical problems as using the discontinuous constraint max(σi).

Input Parameters

Block headline
Parameter Values, Default(*) Description
OPT-RESPONSE_FCT int : STRESS_KS Function ID and type mechanical problem.
Common compulsory parameters
ETA real Finite difference disturbance for sensitivity analysis
GRAD DIRECT, ADJOINT Method of gradient computation
SA GLOBAL_FD, SEMI_ANALYTIC, EXACT_SEMI_ANALYTIC, ANALYTIC Method of derivative computations inside sensitivity analysis
FDA FOREWARD, CENTRAL, BACKWARD Method of finite difference approximation (if neccessary for the chosen sensitivity analysis method)
DESVAR OPT-VAR vector of integers Design variables that are considered in the sensitivity analysis of this response function
Common optional parameters
WEIGHT real, 1.0* The weighting factor for this response function in multi-objective optimization
ANALYSIS PC-ANALYSIS int ID of the underlying analysis
Specific parameters
ELEMENTS El-SET or PART Determines the elements of which the stress is taken into account
STRESS_TYPE VMISES_TOP, VMISES_BOTTOM, VMISES, PRINCIPLE_1_TOP, PRINCIPLE_1_BOTTOM, PRINCIPLE_1 Determines which stress type is taken into account
RHO real Parameter that determines how local the effect of this response function is
STRESS_LIMIT integer Maximum value for the real value of the stress (cannot be combined with ABS_STRESS_LIMIT)
ABS_STRESS_LIMIT integer Maximum value for the absolute value of the stress (cannot be combined with STRESS_LIMIT)
Common Compulsory Parameters for Constraints
Parameter Values, Default(*) Description
REL_LIMIT real Relative limit for constraint, depending on the actual value.
ABS_LIMIT real Absolute limit for constraint. Only one limit can be defined for a constraint.
CONSTRAINT_TYPE INEQUALITY_LT, INEQUALITY_GT, EQUALITY Type of constraint
Common Optional Parameters for Constraints
REL_TOLERANCE real, 0* Upper relative limit until which an inactive constraint is concidered as an active one
LAMBDA_ABS_MAX real, 1/cepsilon* Upper limit for lagrangian multiplier


Example of a Complete Input Block

OPT-RESPONSE_FCT 1 : STRESS_KS

  ! -- basic stuff
  WEIGHT=1.0 ANALYSIS=PC-ANALYSIS 1 ETA=1e-06
  GRAD=ADJOINT SA=SEMI_ANALYTIC FDA=FOREWARD
  DESVAR=OPT-VAR 1,2,3,4,5,6

  ! -- specific
  ELEMENTS = EL-SET 1
  STRESS_TYPE = PRINCIPLE_1_TOP
  RHO = 10.0
  ABS_STRESS_LIMIT = 200.0E06

  ! -- constraint parameters
  ABS_LIMIT = 1-e3
  REL_TOLERANCE = 0.1
  CONSTRAINT_TYPE = INEQUALITY_LT
  LAMBDA_ABS_MAX = 20


Examples

Catenary arch

This example shows the evolution of a circular arch loaded by self weight to a catenary arch during the minimization of the Kreisselmeier-Steinhauser function for the stress. It is clear that the effect of KS is global, even by using local stress results.

Circle catenary.gif

Shell cantilever

This example shows the optimal shape of a cantilever beam subjected to an end load. The structure is modelled by shell elements. During the optimization, the Kreisselmeier-Steinhauser function is minimized while the structural weight was not allowed to increase more than 5%. To avoid singularity at the free end, a bound constraints the movement of the end nodes. The optimization problem is solved by the Augmented Lagrangian Multiplier method for two values of ρ. Comparing the evolution of the shape, it is clear that the design updates are much more local when using a higher value of ρ.


ρ=1
ρ=10




Whos here now:   Members 0   Guests 0   Bots & Crawlers 1
 
Personal tools
Content for Developers