Users:General FEM Analysis/Data Output/Rhinoceros

From Carat++ Public Wiki
Jump to: navigation, search


Contents

General Description

The Rhino postprocessor is developed at the chair as a plug-in for Rhinoceros. More information about Rhinoceros is provided on their web page [1]. The visualization data of the respective inputfiles (out.georhino.txt , out.paramrhino.txt, out.paramlinesrhino.txt, out.post.res) can be manipulated.

Input Parameters

The block mainly consists of switches which can be set to a value equal 1 (on) or a value equals 0 (off).

}

Input Example

Example of a complete input block: 

PC-OUT 1 : RHINO
  GEOM=1
  DISP=1
  STRESS=1
  !STRESS_LINES=1
  GAUSS_POINTS=1
  GAUSS_POINTS_GEO=1
  COUPLING_POINTS=1
  !PAR_LINES=1
  PAR_TRIM=1
  PREC=5
  FPN=1
  OUTPUT_FILE_NAME = benchmark_example

References

  1. ↑ http://www.rhino3d.com
Block headline
Parameter Values, Default(*) Description
PC-OUT int : RHINO ID and type of output object.
Parameters for analysis data
Parameter Values, Default(*) Description
GEOM int (0) Output of mesh geometry and topology (output_file_name.georhino.txt). The parameters 1 (yes) and 0 (no) are valid.
DISP int (0) Output of nodal displacements (output_file_name.post.res). The parameters 1 (yes) and 0 (no) are valid.
STRESS int (0) Output of element stresses on the Gausspoints (output_file_name.post.res). The parameters 1 (yes) and 0 (no) are valid.
STRESS_LINES int (0) Output of brep-element stresses (output_file_name.post.res). The parameters 1 (yes) and 0 (no) are valid. (currently not working)
NODAL_STRESS int (0) Output of element stresses projected to the control points (output_file_name.post.res). The parameters 1 (yes) and 0 (no) are valid.
STRESS_DIRECTION int (0) Output of element stress directions (principle stress directions). The parameters 1 (yes) and 0 (no) are valid.
SUPPORT_FORCE int (0) Output of nodal support forces (output_file_name.post.res). The parameters 1 (yes) and 0 (no) are valid.
RESULT_MINMAX int (0) Output of minimal and maximal values of every result type (output_file_name.postinfo.res). The parameters 1 (yes) and 0 (no) are valid.
Auxiliary parameters
Parameter Values, Default(*) Description
GAUSS_POINTS int (0) Output of the position of the Gauss points in parameter space. The parameters 1 (yes) and 0 (no) are valid.
GAUSS_POINTS_GEO int (0) Output of the position of the Gauss points in geometry space (output_file_name.georhino.text). The parameters 1 (yes) and 0 (no) are valid.
COUPLING_POINTS int (0) Output of the position of the coupling points in geometry space (output_file_name.georhino.text). The parameters 1 (yes) and 0 (no) are valid.
PAR_LINES int (0) if output_file_name.paramrhino.txt is printed (output_file_name.paramrhino.text). The parameters 1 (yes) and 0 (no) are valid.
PAR_TRIM int (0) if output_file_name.paramrhino.txt is printed (output_file_name.paramrhino.text). The parameters 1 (yes) and 0 (no) are valid.
FPN int (0) Switch output syntax to floating point data. The parameters 1 (yes) and 0 (no) are valid.
PREC int (0) Number of digits of floating point data. Parameters in the range from 1 to 16 are valid.
SUPPORT_POS int (0) Output of the position of the supports(currently only point and line supports) (output_file_name.georhino.text). Parameters in the range from 1 to 16 are valid.
LOAD_POS int (0) Output of the position of the loads (currently only point and line loads) (output_file_name.georhino.text). The parameters 1 (yes) and 0 (no) are valid.
CROSS_SECTION int (0) Output of the base vectors of the cross section at every Gauss point (currently only for BEAM_3D_NURBS_KLRod) (output_file_name.georhino.text). Parameters in the range from 1 to 16 are valid.
OUTPUT_FILE_NAME string (out) Prefix of the output files.
Parameters for optimization data (readable, but no output created)
Parameter Values, Default(*) Description
DESIGN_VARIABLE int (0) Output of design variables. The parameters 1 (yes) and 0 (no) are valid.
PURE_GRAD int (0) Output of pure gradients (not filtered). The parameter 1 (yes) and 0 (no) are valid.
SMOOTH_GRAD int (0) Output of smooth gradients. The parameters 1 (yes) and 0 (no) are valid.
SEARCH_DIRECTION int (0) Output of search direction. The parameters 1 (yes) and 0 (no) are valid.
DESIGN_UPDATE int (0) Output of design update. The parameters 1 (yes) and 0 (no) are valid.
VARIABLE_BOUND int (0) Output of variable bounds. The parameters 1 (yes) and 0 (no) are valid.
OPT_DESIGN int (0) Output of optimized design (mesh data). The parameters 1 (yes) and 0 (no) are valid.




Whos here now:   Members 0   Guests 0   Bots & Crawlers 1
 
Retrieved from "http://carat.st.bv.tum.de/caratuserswiki/index.php/Users:General_FEM_Analysis/Data_Output/Rhinoceros"
Personal tools
Content for Users
Content for Developers