Users:Geometry Generation/Design Loads
From Carat++ Public Wiki
< Users:Geometry Generation(Difference between revisions)
(→Example of a Complete Input Block) |
(→Example of a Complete Input Block) |
||
| Line 35: | Line 35: | ||
!SNOW, SNOW_FL + D1=-1 D2=0 D3=0 ! snow load from defined direction | !SNOW, SNOW_FL + D1=-1 D2=0 D3=0 ! snow load from defined direction | ||
!PRES, PRES_FL ! pressure load perpendicular to surface | !PRES, PRES_FL ! pressure load perpendicular to surface | ||
| + | !CENTRIFUGAL + D1=1.0 D2=0.0 D3=0.0 VAL=1 CTR_PT = 0,0,0 ! centrifugal load accounting for a rotating with constant rotational velocity body acting along axis (D1,D2,D3) around CTR_PT with amplitude VAL (VAL = rotationalVelocity*density*thickness) | ||
!MOMENT_TAN ! moment around center line = nurbs curve | !MOMENT_TAN ! moment around center line = nurbs curve | ||
!MOMENT_G1, MOMENT_G1_FL ! moment around G1 / g1 (base vector of the geometric description of the element) | !MOMENT_G1, MOMENT_G1_FL ! moment around G1 / g1 (base vector of the geometric description of the element) | ||
Latest revision as of 21:14, 4 March 2018
Neumann boundary conditions can be applied to design elements with respect to their parametric coordinates.
Example of a Complete Input Block
!=================================================================== ! ID TYPE DE-EL LOC COOR D1 D2 D3 VAL !=================================================================== DE-LOAD 1 DEAD 1 u=10.0 D1=-1 D2=0 D3=0 VAL = 1 DE-LOAD 2 DEAD 1 D1=-1 D2=0 D3=0 VAL = 1 LD-CURVE 1 DE-LOAD 3 MOMENT 1 DE-BREP 1 D1=-1 D2=0 D3=0 VAL = 1 DE-LOAD 4 DEAD 1 u=5~7 v=3~10 D1=-1 D2=0 D3=0 VAL = 1 !values for u and v have to be knots !!Load type not necessarily defined for element type !DEAD, DEAD_FL + D1=-1 D2=0 D3=0 ! dead load in defined direction !SNOW, SNOW_FL + D1=-1 D2=0 D3=0 ! snow load from defined direction !PRES, PRES_FL ! pressure load perpendicular to surface !CENTRIFUGAL + D1=1.0 D2=0.0 D3=0.0 VAL=1 CTR_PT = 0,0,0 ! centrifugal load accounting for a rotating with constant rotational velocity body acting along axis (D1,D2,D3) around CTR_PT with amplitude VAL (VAL = rotationalVelocity*density*thickness) !MOMENT_TAN ! moment around center line = nurbs curve !MOMENT_G1, MOMENT_G1_FL ! moment around G1 / g1 (base vector of the geometric description of the element) !MOMENT_POINT + D1=-1 D2=0 D3=0 ! single moment around defined axis !MOMENT + D1=-1 D2=0 D3=0 ! (single) moment around defined axis !PAR_G1 ! load in g1 direction (has to be tested) !PAR_G2 ! load in g2 direction (has to be tested) !TEMP ! temperature load, equally distributed (+- epsilon) !DELTA_TEMP (+ D1=-1 D2=0 D3=0 ) ! temperature load with gradiant over thickness (in defined direction) (+- kappa)
In order to activate them, they have to be added to the respective load combination.
LD-COM 1 TYPE=LD-NODE 1 FAC= 1.0 TYPE=LD-ELEM 3 FAC= 1.0
| Whos here now: Members 0 Guests 0 Bots & Crawlers 1 |
