Users:General FEM Analysis/Elements Reference/Quad1
(→General Description) |
|||
| Line 8: | Line 8: | ||
=== Element Type === | === Element Type === | ||
| − | This class provides a purely displacement formulated four-noded plane stress / plane strain element. It is only | + | This class provides a purely displacement formulated four-noded plane stress/plane strain element. '''It is only intended for comparisons and introductory purpose'''. The element is only able to perform geometrically linear static computations and cannot carry element loads. |
=== Degrees of Freedom === | === Degrees of Freedom === | ||
| − | All | + | All nodes of the plane stress/stain element have to be defined in the plane ''z=0''. <br> |
| − | They are named ''Disp_X'', ''Disp_Y | + | They are named ''Disp_X'', ''Disp_Y''. |
| − | + | ||
== Input Parameters == | == Input Parameters == | ||
Revision as of 07:01, 7 September 2010
Contents |
General Description
Element Type
This class provides a purely displacement formulated four-noded plane stress/plane strain element. It is only intended for comparisons and introductory purpose. The element is only able to perform geometrically linear static computations and cannot carry element loads.
Degrees of Freedom
All nodes of the plane stress/stain element have to be defined in the plane z=0.
They are named Disp_X, Disp_Y.
Input Parameters
Parameter Description
| Compulsory Parameters | ||
| Parameter | Values, Default(*) | Description |
|---|---|---|
| MAT | EL-MAT int | Linking to a material input block |
| INT_TYPE_HEXA | FULL, REDUCED | Control of integration type 20-noded elements are able to perform a uniform reduced integration (2x2x2 instead of 3x3x3) without hourglassing stabilisation |
| Optional Parameters | ||
| Parameter | Values, Default(*) | Description |
| EAS | int | Flag Enhances Assumed Strains (EAS) method Possible values are:
|
Example of a Complete Input Block
EL-PROP 1: SOLIDHEXA1 MAT = EL-MAT 1 INT_TYPE_HEXA = FULL EAS = 0
Inside the property block there is no distinction between linear and quadratic formulated elements. It is possible to define 8-noded, 20-noded and 27-noded elements using one and the same element property (assuming that no EAS is used):
! ElementID Part-ID EL-PROP Node-IDs NEL 1 1 1 1 2 3 4 5 6 7 8 ! 8-noded element NEL 2 1 1 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 36 38 39 40 !20-noded element NEL 3 1 1 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 66 68 69 70 71 72 73 74 75 76 77 !27-noded element
Element Loading
Hexahedral elements are able to carry two types of element loads:
- dead load
- temperature load
Dead Load
Dead weight of an element is computed by multiplying material's denisity (ρ) with gravity's acceleration, which has to be defined inside the load block concearning its direction and size.
An example for a load definition of a concrete structure (assuming linear elastic isotropic material behaviour) with gravity acting in positive z-direction would look like
EL-MAT 1 : LIN_ELAST_ISOTROPIC EMOD=3.5e10 ALPHAT=1e-5 DENS=2.5e3 NUE=0.2
LD-ELEM 1 PART=1 TYPE=DEAD D1=0.0 D2=0.0 D3=1.0 VAL=9.81
whereat the finite elemet model is based on SI units (m, N, kg).
Temperature Load
This paragraph only focuses at element specific topics concearing temperature load. For more detailed descriptions please look at the load documentation
For the computation of temperature loads solid elements do not concider any layer of laminate structure within the element. So only the temperature defined for layer number one is considered at each node.
The combination of temperature loading and EAS improvement is possible.
LD-ELEM 1 sTYPE = TEMPERATURE ND-SET = 1 LAYER = 1 VAL = +10 ND-SET = 2 LAYER = 1 VAL = -10
The EAS Method
The idea of enhanced assumed strains is to enlarge the element srain field by a set of additional strains in order to enable the element to express certain states of displacement without locking due to parasitic strains. [1] [2].
To this purpose the strain-displacement relation is enlarged by additional terms which leads to a modified element stiffness matrix:
The following example will show the benefit of EAS improved elements toward purely displacment formulated eight-noded hexahedrals. The investigated system is a tip loaded cantilever wherby the cross section is modeled by one element.
|
|
| Element HEXA8 | Element HEXA8EAS9 |
The pure displacement based elements show the well known in-plane shear locking which increases along the cantilever with increasing bending moment. As artificial strain/shear produces artificial stiffness, the tip displacement is extremly under estimated.
In contrast the EAS improved elements are able to eliminate artificial strains arrising from locking, and so tip displacement is described correctly.
References
- ↑ J.C. Simo, M.S. Rifai: „A class of mixed assumed strain methods and the method of incompatible modes“, in „International Journal for Numerical Methods in Engineeering“, Vol. 29, 1990, pages 1595-1638
- ↑ U. Andelfinger, E. Ramm: „EAS-Elements for two-dimensional, three-dimensional, plate and shell structures and their equivalence to HR-Elements“, in „International Journal for Numerical Methods in Engineeering“, Vol. 36, 1993, pages 1311-1337
| Whos here now: Members 0 Guests 0 Bots & Crawlers 1 |
