Users:General FEM Analysis/Elements Reference/Shell NURBS KL

From Carat++ Public Wiki
(Difference between revisions)
Jump to: navigation, search
Line 8: Line 8:
 
   THICKNESS = 1.0
 
   THICKNESS = 1.0
 
   COUPLING = EL-PROP 6                      !BRep coupling element to handle C^0 continuity inside the patch
 
   COUPLING = EL-PROP 6                      !BRep coupling element to handle C^0 continuity inside the patch
! STABILIZATION = EL-PROP 7              !Stabilization element for improving condition number
+
! STABILIZATION = EL-PROP 7              !Stabilization element for improving condition number (requires some tests, no optimal solution)
 
   NEJA = NURBS !DIP or FULL                !Method for handling the integration for trimmed elements(use NURBS)
 
   NEJA = NURBS !DIP or FULL                !Method for handling the integration for trimmed elements(use NURBS)
 
   INT_TYPE_SHELL_NURBS_KL = USER !or FULL or OPTIMAL  !FULL means p+1 and q+1;OPTIML uses in the interior of the patch less quadrature points (some tests required for higher polynomial degrees >3
 
   INT_TYPE_SHELL_NURBS_KL = USER !or FULL or OPTIMAL  !FULL means p+1 and q+1;OPTIML uses in the interior of the patch less quadrature points (some tests required for higher polynomial degrees >3

Revision as of 06:36, 9 December 2016

Contents

General Description

This element is based on the Phd Thesis of J.Kiendl.

Example of a Complete Input Block

EL-PROP 1 : SHELL_NURBS_KL  
  MAT= EL-MAT 1                                      !material property
  THICKNESS = 1.0
  COUPLING = EL-PROP 6                       !BRep coupling element to handle C^0 continuity inside the patch
! STABILIZATION = EL-PROP 7               !Stabilization element for improving condition number (requires some tests, no optimal solution)
  NEJA = NURBS !DIP or FULL                 !Method for handling the integration for trimmed elements(use NURBS)
  INT_TYPE_SHELL_NURBS_KL = USER !or FULL or OPTIMAL   !FULL means p+1 and q+1;OPTIML uses in the interior of the patch less quadrature points (some tests required for higher polynomial degrees >3
! GAUSS_U = 4                                          !# of quadratur points in u-dir in case of INT_TYPE = USER
! GAUSS_V = 4                                          !# of quadratur points in u-dir in case of INT_TYPE = USER


Element Type

  • The element formulation is well tested for static and dynamic linear and nonlinear analysis.
  • Stresses for nonlinear case need to be corrected.
  • Can be used for thin shell structures

Degrees of Freedom

The element uses three translatoric degrees of freedom (Disp_X, Disp_Y, Disp_Z) at each control point.

Parameter Description

Compulsory Parameters
Parameter Values, Default(*) Description
MAT EL-MAT int Linking to a material input block
INT_TYPE_SHELL_NURBS_KL FULL, USER, OPTIMAL Control of integration type.
  • FULL: p+1 and q+1 quadrature points are used (p and q are the polynomial degrees of the NURBS patch)
  • USER: the optional parameters GAUSS_U and GAUSS_V define the number of quadrature points
  • OPTIMAL: uses in the interior of the patch less quadrature points (some tests required for higher polynomial degrees >3
THICKNESS float Thickness of the shell
Optional Parameters
Parameter Values, Default(*) Description
GAUSS_U GAUSS_U = int Number of Gauss point per element. Must only to be defined when INT_TYPE_BEAM_3D_NURBS_KLRod = USER


Element Loading

The KL shell element is able to handle the following loads:

  • dead load
  • snow load
  • pressure load

Benchmarks

The main benchmark file in the Carat++-repository is

  • '../examples/benchmark_examples/isogeometric/KL_shell_trim_plate_hole/cbm_plate_with_hole.txt'.

It is further used in:

  • '../examples/benchmark_examples/isogeometric/isogeometric_trim_non_linear/cbm_PlateHoleLineSupHighAcc.txt.txt'

References





Whos here now:   Members 0   Guests 0   Bots & Crawlers 1
 
Personal tools
Content for Developers