Users:General FEM Analysis/Elements Reference/NURBS BRep Edge cord
From Carat++ Public Wiki
(Difference between revisions)
(→Parameter Description) |
|||
Line 27: | Line 27: | ||
|Linking to a material input block | |Linking to a material input block | ||
|- | |- | ||
− | ! | + | !INT_TYPE_NURBS_BREP_CHORD |
|FULL, USER | |FULL, USER | ||
|Control of integration type. | |Control of integration type. | ||
Line 49: | Line 49: | ||
!GAUSS_U | !GAUSS_U | ||
|GAUSS_U = ''int'' | |GAUSS_U = ''int'' | ||
− | |Number of Gauss point per element. Must only to be defined when | + | |Number of Gauss point per element. Must only to be defined when INT_TYPE_NURBS_BREP_CHORD = USER |
|- | |- | ||
|} | |} |
Revision as of 07:41, 23 October 2017
Contents |
General Description
Coded and testing is in progress.
Element Type
- This element provides a geometrically nonlinear, isogeometric spatial cable.
- Mass computation is implemented.
The formulation is stabilized by an additional bending stiffness based on Raknes et al.[1]. The bending stiffness is computed out of the area with the assumption of a circular cross section.
Degrees of Freedom
The element uses the translatoric degrees of freedom (Disp_X, Disp_Y, Disp_Z) at each control point.
Parameter Description
Compulsory Parameters | ||
Parameter | Values, Default(*) | Description |
---|---|---|
MAT | EL-MAT int | Linking to a material input block |
INT_TYPE_NURBS_BREP_CHORD | FULL, USER | Control of integration type.
|
CROSS SECTION | AREA = float | area of the cross section |
PRESTRESS | PRESTRESS = float | prestress of the cable element |
Optional Parameters | ||
Parameter | Values, Default(*) | Description |
GAUSS_U | GAUSS_U = int | Number of Gauss point per element. Must only to be defined when INT_TYPE_NURBS_BREP_CHORD = USER |
Example of a Complete Input Block
EL-PROP 1 : NURBS_BREP_CHORD MAT= EL-MAT 1 AREA = 1 PRESTRESS = 4000 INT_TYPE_NURBS_BREP_CHORD = USER or FULL GAUSS_U = 4
Element Loading
The NURBS_BRep_Edge_Cord element is able to carry the following loads:
- dead load
- snow load
- pressure load
- temperature load (not tested)
Benchmarks
The main benchmark file in the Carat++-repository is
- '../examples/benchmark_examples/isogeometric/iga_formfinding_4point_with_trusses/cbm_4PointSailwTrusses.txt'.
References
- ↑ S.B. Raknes, X. Deng, Y. Bazilevs, D.J. Benson, K.M. Mathisen, T. Kvamsdal: „Isogeometric rotation-free bending-stabilized cables: Statics, dynamics, bending strips and coupling with shells“, in „Computer methods in applied mechanics and engineering“, Vol. 263, 2013, Seiten 127-143 http://dx.doi.org/10.1016/j.cma.2013.05.005
Whos here now: Members 0 Guests 0 Bots & Crawlers 1 |