Users:General FEM Analysis/Elements Reference/Beam 3D NURBS KLRod

Revision as of 11:51, 30 November 2016 (view source) Bauer (Talk | contribs) ← Older edit		Revision as of 11:54, 30 November 2016 (view source) Bauer (Talk | contribs) Newer edit →
Line 1:		Line 1:
−	Coded and tested.	+
	== General Description ==		== General Description ==

---

Revision as of 11:54, 30 November 2016

Contents 1 General Description 1.1 Element Type 1.2 Degrees of Freedom 1.3 Parameter Description 1.4 Example of a Complete Input Block 2 Element Loading 3 Benchmarks

General Description

Element Type

• This element provides a geometrically nonlinear, isogeometric spatial Bernoulli beam^[1].
• Torsion without warping is included
• The element formulation can handle arbitrary orientations of the cross section along the beam.

Degrees of Freedom

The elements uses three translatoric degrees of freedom (Disp_X, Disp_Y, Disp_Z) and a rotational degree of freedom (Rot_Tan) at each control point.

Parameter Description

Compulsory Parameters
Parameter	Values, Default(*)	Description
MAT	EL-MAT int	Linking to a material input block
INT_TYPE_BEAM_3D_NURBS_KLRod	FULL, USER	Control of integration type. If USER, the optional Parameter GAUSS_U (and GAUSS_V) has to be defined
CROSS SECTION	DIAMETER = float	circular cross section defined ba the diameter. A = d^2π/4, Iy = Iz = d^4π/32, It= d^4π/32
	HEIGHT = float WIDTH = float	rectangular cross section defined by height and width. A = h*w, Iy = h^3*w/12 Iz = h*w^3/12 It= min(h,w)^3*max(h,w)/3
	AREA = float IY = float IZ = float IT = float	cross section defined directly
AXIS	AXIS float1 float2 float3 float4	Definition of the cross sectional principal axis. Second axis is perpendicual to first and tangent of the curve. float1 is the position on the curve and float - float4 the direction (x,y,z). Base vectors are normalized and linearly interpolated for postions inbetween the defined ones. Axes for start and end knot of the NURBS curve are mandatory.
Optional Parameters
Parameter	Values, Default(*)	Description
GAUSS_U	GAUSS_U = int	Number of Gauss point per element. Must only to be defined when INT_TYPE_BEAM_3D_NURBS_KLRod = USER

Example of a Complete Input Block

EL-PROP 1 : BEAM_3D_NURBS_KLRod
  MAT= EL-MAT 1  
  
  DIAMETER=1.0
  !or:
  HEIGHT=1.0
  WIDTH=1.0
  or:
  AREA=1.0000e+008
  IY=1.0000e+008
  IZ=1.0000e+008
  IT=1.0000e+008
  
  INT_TYPE_BEAM_3D_NURBS_KLRod = FULL
  !or:
  INT_TYPE_BEAM_3D_NURBS_KLRod = USER
  GAUSS_U = 3
  
  !  	U	    	n1		n2 		n3
  AXIS	0.000000e+000	0.000000e+000	1.000000e+000	0.000000e+000
  AXIS	1.000000e+000	0.000000e+000	1.000000e+000	0.000000e+000

Element Loading

The Beam_3D_NURBS_KLRod element is able to carry the following loads:

• dead load
• snow load
• pressure load
• moment

Benchmarks

The main benchmark file in the Carat++-repository is

• '../examples/benchmark_examples/isogeometric/iga_kl_rod_nln/cbm_iga_kl_rod_nln.txt' .

It is further used in:

• '../examples/benchmark_examples/isogeometric/iga_formfinding_4point_with_trusses/cbm_4PointSailwTrusses.txt'

Cite error: <ref> tags exist, but no <references/> tag was found

Whos here now:   Members 0   Guests 0   Bots & Crawlers 1