Users:General FEM Analysis/Elements Reference/Beam 3D NURBS KLRod

From Carat++ Public Wiki
< Users:General FEM Analysis | Elements Reference(Difference between revisions)
Jump to: navigation, search
(Example of a Complete Input Block)
 
(9 intermediate revisions by one user not shown)
Line 1: Line 1:
Coded and tested.
+
== General Description ==
  
Documentation will be coming soon!
+
 
 +
=== Element Type ===
 +
 
 +
* This element provides a geometrically nonlinear, isogeometric spatial Bernoulli beam<ref> A. M. Bauer, M. Breitenberger, B. Philipp, R. Wüchner, K.-U. Bletzinger: „Nonlinear isogeometric spatial Bernoulli beam“, in „Computer methods in applied mechanics and engineering“, Vol. 303, 2016, Seiten 101-127 http://dx.doi.org/10.1016/j.cma.2015.12.027 </ref>.
 +
* Torsion without warping is included
 +
* The element formulation can handle arbitrary orientations of the cross section along the beam.
 +
 
 +
=== Degrees of Freedom ===
 +
 
 +
The element uses three translatoric degrees of freedom (''Disp_X'', ''Disp_Y'', ''Disp_Z'') and a rotational degree of freedom (''Rot_Tan'') at each control point.
  
 
=== Parameter Description ===
 
=== Parameter Description ===
Line 18: Line 27:
 
!INT_TYPE_BEAM_3D_NURBS_KLRod
 
!INT_TYPE_BEAM_3D_NURBS_KLRod
 
|FULL, USER
 
|FULL, USER
|Control of integration type. If USER, the optional Parameter GAUSS_U (and GAUSS_V) has to be defined
+
|Control of integration type.  
 +
* FULL: p+1 Gauss points are used (p = polynomial degree of the NURBS patch)
 +
* USER: the optional Parameter GAUSS_U defines the number of Gauss points
 
|-
 
|-
 
!rowspan="3" | CROSS SECTION  
 
!rowspan="3" | CROSS SECTION  
Line 56: Line 67:
 
   HEIGHT=1.0
 
   HEIGHT=1.0
 
   WIDTH=1.0
 
   WIDTH=1.0
   or:
+
   !or:
 
   AREA=1.0000e+008
 
   AREA=1.0000e+008
 
   IY=1.0000e+008
 
   IY=1.0000e+008
Line 71: Line 82:
 
   AXIS 1.000000e+000 0.000000e+000 1.000000e+000 0.000000e+000
 
   AXIS 1.000000e+000 0.000000e+000 1.000000e+000 0.000000e+000
 
</pre>
 
</pre>
 +
 +
== Element Loading ==
 +
 +
The Beam_3D_NURBS_KLRod element is able to carry the following loads:
 +
* dead load
 +
* snow load
 +
* pressure load
 +
* moment
 +
 +
== Benchmarks ==
 +
 +
The main benchmark files in the ''Carat++''-repository are
 +
* '../examples/benchmark_examples/isogeometric/iga_kl_rod_lin/cbm_beam3D_nurbs_csa.txt'.
 +
* '../examples/benchmark_examples/isogeometric/iga_kl_rod_nln/cbm_iga_kl_rod_nln.txt'.
 +
It is further used in:
 +
* '../examples/benchmark_examples/isogeometric/iga_formfinding_4point_with_trusses/cbm_4PointSailwTrusses.txt'
 +
 +
== References ==
 +
 +
<references/>

Latest revision as of 09:49, 20 December 2016

Contents

General Description

Element Type

  • This element provides a geometrically nonlinear, isogeometric spatial Bernoulli beam[1].
  • Torsion without warping is included
  • The element formulation can handle arbitrary orientations of the cross section along the beam.

Degrees of Freedom

The element uses three translatoric degrees of freedom (Disp_X, Disp_Y, Disp_Z) and a rotational degree of freedom (Rot_Tan) at each control point.

Parameter Description

Compulsory Parameters
Parameter Values, Default(*) Description
MAT EL-MAT int Linking to a material input block
INT_TYPE_BEAM_3D_NURBS_KLRod FULL, USER Control of integration type.
  • FULL: p+1 Gauss points are used (p = polynomial degree of the NURBS patch)
  • USER: the optional Parameter GAUSS_U defines the number of Gauss points
CROSS SECTION DIAMETER = float circular cross section defined ba the diameter. A = d^2π/4, Iy = Iz = d^4π/32, It= d^4π/32
HEIGHT = float
WIDTH = float
rectangular cross section defined by height and width. A = h*w, Iy = h^3*w/12 Iz = h*w^3/12 It= min(h,w)^3*max(h,w)/3
AREA = float
IY = float
IZ = float
IT = float
cross section defined directly
AXIS AXIS float1 float2 float3 float4 Definition of the cross sectional principal axis. Second axis is perpendicual to first and tangent of the curve. float1 is the position on the curve and float - float4 the direction (x,y,z). Base vectors are normalized and linearly interpolated for postions inbetween the defined ones. Axes for start and end knot of the NURBS curve are mandatory.
Optional Parameters
Parameter Values, Default(*) Description
GAUSS_U GAUSS_U = int Number of Gauss point per element. Must only to be defined when INT_TYPE_BEAM_3D_NURBS_KLRod = USER


Example of a Complete Input Block

EL-PROP 1 : BEAM_3D_NURBS_KLRod
  MAT= EL-MAT 1  
  
  DIAMETER=1.0
  !or:
  HEIGHT=1.0
  WIDTH=1.0
  !or:
  AREA=1.0000e+008
  IY=1.0000e+008
  IZ=1.0000e+008
  IT=1.0000e+008
  
  INT_TYPE_BEAM_3D_NURBS_KLRod = FULL
  !or:
  INT_TYPE_BEAM_3D_NURBS_KLRod = USER
  GAUSS_U = 3
  
  !  	U	    	n1		n2 		n3
  AXIS	0.000000e+000	0.000000e+000	1.000000e+000	0.000000e+000
  AXIS	1.000000e+000	0.000000e+000	1.000000e+000	0.000000e+000

Element Loading

The Beam_3D_NURBS_KLRod element is able to carry the following loads:

  • dead load
  • snow load
  • pressure load
  • moment

Benchmarks

The main benchmark files in the Carat++-repository are

  • '../examples/benchmark_examples/isogeometric/iga_kl_rod_lin/cbm_beam3D_nurbs_csa.txt'.
  • '../examples/benchmark_examples/isogeometric/iga_kl_rod_nln/cbm_iga_kl_rod_nln.txt'.

It is further used in:

  • '../examples/benchmark_examples/isogeometric/iga_formfinding_4point_with_trusses/cbm_4PointSailwTrusses.txt'

References

  1. A. M. Bauer, M. Breitenberger, B. Philipp, R. Wüchner, K.-U. Bletzinger: „Nonlinear isogeometric spatial Bernoulli beam“, in „Computer methods in applied mechanics and engineering“, Vol. 303, 2016, Seiten 101-127 http://dx.doi.org/10.1016/j.cma.2015.12.027




Whos here now:   Members 0   Guests 0   Bots & Crawlers 1
 
Personal tools
Content for Developers