Users:Geometry Generation/Design Evaluation Points

---

Revision as of 14:48, 17 September 2018

Design Evaluation Points can be used to input evaluation points from outside.

Input Parameters

The block has to be initialized by DE-EVALPTS #id. Every design evaluation point in the list starts with DE-EVALPT. This is followed by the ID, the corresponding location and weight.

Parameter Description

Compulsory Parameters
Parameter	Values, Default(*)	Description
Element type	DE-EVALPT	Element type = design boundary
ID	int	ID of the design boundary element
x	float	Coordinate in x-direction
y	float	Coordinate in y-direction
z	float	Coordinate in z-direction
Optional Parameters
Parameter	Values, Default(*)	Description
TOL	TOL = float	allowed distance between master and slave point
LOC	[ float ]	position on a curve
	[ float float ]	position on a surface interval on a curve

Example of a Complete Input Block

!===================================================================
!          ID  x          y          z          w                g1_x        g1_y       g1_z              g2_x       g2_y       g2_z              g3_x       g3_y       g3_z              
DE-EVALPTS 2                                                                                              
 DE-EVALPT 14  1.5773e+00 1.9659e+00 0.0000e+00 4.6515e+00
 DE-EVALPT 15  1.5773e+00 7.3370e+00 0.0000e+00 4.6515e+00
 DE-EVALPT 16  4.2264e-01 2.1257e+00 0.0000e+00 5.0295e+00
 DE-EVALPT 17  4.2264e-01 7.9334e+00 0.0000e+00 5.0295e+00
DE-EVALPTS 10000                                                                                          
 DE-EVALPT 18  1.5773e+00 9.303e+00 0.0000e+00 1.1953e+00 G1_PAR -8.3658e-01 5.4783e-01 0.0000e+00 G2_PAR 0.0000e+00 0.0000e+00 0.0000e+00 G3_PAR 0.0000e+00 0.0000e+00 0.0000e+00 
 DE-EVALPT 19  4.2264e-01 1.005e+01 0.0000e+00 1.1953e+00 G1_PAR -8.3658e-01 5.4783e-01 0.0000e+00 G2_PAR 0.0000e+00 0.0000e+00 0.0000e+00 G3_PAR 0.0000e+00 0.0000e+00 0.0000e+00 

Whos here now:   Members 0   Guests 0   Bots & Crawlers 1