Users:General FEM Analysis/Elements Reference/Shell NURBS KL
From Carat++ Public Wiki
(Difference between revisions)
| Line 1: | Line 1: | ||
== General Description == | == General Description == | ||
| − | This element is based on the [https://mediatum.ub.tum.de/node?id=1002634 Phd Thesis of J.Kiendl]. | + | This element is based on the <ref>J. Kiendl, K.-U. Bletzinger, J. Linhard, and R.Wüchner. “Isogeometric shell analysis with Kirchhoff–Love elements.” In: ComputerMethods in AppliedMechanics and Engineering 198.49-52 (2009), pp. 3902–3914. DOI: 10.1016/j.cma.2009.08.013 </ref> and [https://mediatum.ub.tum.de/node?id=1002634 Phd Thesis of J.Kiendl]. |
=== Example of a Complete Input Block === | === Example of a Complete Input Block === | ||
Revision as of 06:39, 9 December 2016
Contents |
General Description
This element is based on the [1] and Phd Thesis of J.Kiendl.
Example of a Complete Input Block
EL-PROP 1 : SHELL_NURBS_KL MAT= EL-MAT 1 !material property THICKNESS = 1.0 COUPLING = EL-PROP 6 !BRep coupling element to handle C^0 continuity inside the patch ! STABILIZATION = EL-PROP 7 !Stabilization element for improving condition number (requires some tests, no optimal solution) NEJA = NURBS !DIP or FULL !Method for handling the integration for trimmed elements(use NURBS) INT_TYPE_SHELL_NURBS_KL = USER !or FULL or OPTIMAL !FULL means p+1 and q+1;OPTIML uses in the interior of the patch less quadrature points (some tests required for higher polynomial degrees >3 ! GAUSS_U = 4 !# of quadratur points in u-dir in case of INT_TYPE = USER ! GAUSS_V = 4 !# of quadratur points in u-dir in case of INT_TYPE = USER
Element Type
- The element formulation is well tested for static and dynamic linear and nonlinear analysis.
- Stresses for nonlinear case need to be corrected.
- Can be used for thin shell structures
Degrees of Freedom
The element uses three translatoric degrees of freedom (Disp_X, Disp_Y, Disp_Z) at each control point.
Parameter Description
| Compulsory Parameters | ||
| Parameter | Values, Default(*) | Description |
|---|---|---|
| MAT | EL-MAT int | Linking to a material input block |
| INT_TYPE_SHELL_NURBS_KL | FULL, USER, OPTIMAL | Control of integration type.
|
| THICKNESS | float | Thickness of the shell |
| Optional Parameters | ||
| Parameter | Values, Default(*) | Description |
| GAUSS_U | GAUSS_U = int | Number of Gauss point per element. Must only to be defined when INT_TYPE_BEAM_3D_NURBS_KLRod = USER |
Element Loading
The KL shell element is able to handle the following loads:
- dead load
- snow load
- pressure load
Benchmarks
The main benchmark file in the Carat++-repository is
- '../examples/benchmark_examples/isogeometric/KL_shell_trim_plate_hole/cbm_plate_with_hole.txt'.
It is further used in:
- '../examples/benchmark_examples/isogeometric/isogeometric_trim_non_linear/cbm_PlateHoleLineSupHighAcc.txt.txt'
References
- ↑ J. Kiendl, K.-U. Bletzinger, J. Linhard, and R.Wüchner. “Isogeometric shell analysis with Kirchhoff–Love elements.” In: ComputerMethods in AppliedMechanics and Engineering 198.49-52 (2009), pp. 3902–3914. DOI: 10.1016/j.cma.2009.08.013
| Whos here now: Members 0 Guests 0 Bots & Crawlers 1 |
